You are not logged in.
Pages: 1
I would like to test it, the examples refer to port 33 which is closed, I have to open adding a firewall service or there is another pen port that I can use? Esxi 5.5.0
thanks
Offline
You can use any port you want, just as long as it's not used by another service.
Offline
Sorry to bother, i'm resuming tests, there an open port (i suppose) in esxi firewall 427 CIM SLP, soi' trying to use it. I started sxidiff in server mode:
bin/xsidiff --source=xx.xx.xx.xx:427 --target=testfile
Listening socket: IP xx.xx.xx.xx, port 427
Receive buffer size 32768
- First question, how i can stop this, the ctrl-c seems not responding, i have to kill process
Starting client side:
./xsidiff --source=/vmfs/volumes/datastore1/testfile --target=zz.zz.zz.zz:427
Meta-data available, zero aware copy
Reading from file /vmfs/volumes/datastore1/bkp/zfs1/zfs2-flat.vmdk
Writing to socket, block size 16384
Connected to socket 5
Error writing struct info to SOCKET 5Set input file offset to 0 bytes
Error writing struct offset_out position 0
Error writing struct offset_out position 5242880
Error writing struct offset_out position 115343360
... same errors with different numbers
Error writing struct offset_out position 21473787904
100.00% done
Time taken: 87 seconds
Speed 105.55 mb/s
Overall speed 235.40 mb/s
Destination file is zero byte, what's wrong? How can i test if the ports are reachable on both sides?
Thanks a lot.
Offline
nevermind, solved opening new port, now testing real speeds...
Offline
Please, note this thread corresponds to an old software edition - (c)XSIBackup Classic - which has been deprecated. Use our latest software edition: [b](c)XSIBackup-DC[/b] and refer to [url=https://33hops.com/xsibackup-dc-full-manual-home.html]its manual[/url] to [url=https://33hops.com/xsibackup-vmware-esxi-backup.html#prodchart]backup your (c)ESXi VMs[/url] as of 2021
Offline
Pages: 1