Seg Fault on manual backup

rob@24365.ca · 2019-11-04 16:15:57

Hello all... I am getting a seg fault when testing a new NFS mount when running the backup manually.... See my command below:

/vmfs/volumes/datastore1/xsi-dir/xsibackup --backup-prog=Vmkfstools --backup-point="/vmfs/volumes/VMware_Backup_Nas-1" --backup-type=Custom --backup-vms="Auth-1" --backup-how=Hot --mail-to=rmorin@domain.com --use-smtp=1 --description="Simple Vmkfstools backup" --smtp-srv=zion.hardent.com --smtp-auth="none" --smtp-usr="any" --smtp-pwd="any" --smtp-port=25 --exec=yes >> "/vmfs/volumes/datastore1/xsi-dir/var/logs/xsibackup.log"

Segmentation fault
Killed

However the backup does run and complete, i get an email saying it was ok, see below

Mon Nov 4 16:09:02 UTC 2019
XSIBACKUP-PRO 11.2.3 AT HOST:
rob-SYS-5019S-ML.hardent.com
IP v4: 192.168.2.219/ 255.255.255.0
VMware ESXi 6.7.0 build-13644319

Done hot backup (id: unknown) using vmkfstools (no compression)
Available room in device /vmfs/volumes/VMware_Backup_Nas-1 before backup: 3662 Gb.
Sparse size on disk of the selected virtual machines: 16 Gb.
Needed room in device /vmfs/volumes/VMware_Backup_Nas-1 for backup: 16 Gb.
(Id)VM Name State Size (Gb) Stop Copy Start Time (min:sec) Speed (mb/s)
(10) Auth-1 ON 16.25/ 16.84 NO (hot backup) OK - 02:30 109/ 109
Available space in device /vmfs/volumes/VMware_Backup_Nas-1 after backup: 3651 Gb.
Complete backup elapsed time: 2 min
The ESXi configuration was saved to /vmfs/volumes/VMware_Backup_Nas-1

I can browse the new NFS datastore from within vmware gui and copy files to it also...

The crontab backup works fine every day, but just this manual produces this seg fault as far as i know. Did i miss something?

Thanks....

Last edited by rob@24365.ca (2019-11-04 16:26:12)

admin · 2019-11-05 10:58:20

Publish the whole output please, in special the part where you receive the SEGFAULT

rob@24365.ca · 2019-11-05 14:39:19

That is the whole output from command line.

The log file contains the following from last night cron backup:

---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:01:02| ###############################################################################
2019-11-05T00:01:02| XSIBACKUP-PRO 11.2.3: new execution request
2019-11-05T00:01:02| ###############################################################################
2019-11-05T00:01:02|
2019-11-05T00:01:03| NOTICE: (c) XSIBackup kills any user launched jobs, make sure you don't overlap manual jobs
---------------------------------------------------------------------------------------------------------------------------------
XSIBackup PID: 3109521 rob-SYS-5019S-ML.domain.com
Tue, 05 Nov 2019 00:01:03 +0000 IPv4: 192.168.2.219/255.255.255.0
VMware ESXi 6.7.0 build-13644319 (c) Rsync 3.1.0 as opt. dependency
---------------------------------------------------------------------------------------------------------------------------------
Backup Id: 001 Intel(R) Xeon(R) CPU E3-1245 v6 @ 3.70GHz
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:01:03| Backup description: Simple Vmkfstools backup
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:01:03| Message: crontab is installed for user root
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:01:04| Backup user is: root
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:01:04| Backup program is: vmkfstools
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:01:05| --backup-point found at /vmfs/volumes/Backups (filesystem: NFS)
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:01:05| Getting list of all VMs...
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:01:05| 10 Auth-1 [Datastore2] Auth-1/Auth-1a.vmx centos6_64Guest vmx-13
2019-11-05T00:01:05| 11 ad-1.domain.com [Datastore2] ad-1.domain.com/ad-1.domain.com.vmx windows8Server64Guest vmx-13
2019-11-05T00:01:06| 16 Tank - FTP [Datastore2] Tank - FTP/Tank - FTP.vmx ubuntu64Guest vmx-13
2019-11-05T00:01:06| 17 Egitlab [Datastore2] Egitlab/Egitlab.vmx ubuntu64Guest vmx-13
2019-11-05T00:01:06| 19 FlexLM-1 [Datastore2] FlexLM-1/Default-Ubuntu-16.04.vmx ubuntu64Guest vmx-13
2019-11-05T00:01:07| 20 LSF Master [Datastore2] LSF Master/LSF Master.vmx ubuntu64Guest vmx-13
2019-11-05T00:01:07| 21 Centos-nfs-server [Datastore2] Centos-Test/Centos-Test.vmx centos7_64Guest vmx-14
2019-11-05T00:01:08| 22 Ubuntu-client [Datastore2] Ubuntu-Test/Ubuntu-Test.vmx ubuntu64Guest vmx-14
2019-11-05T00:01:08| 23 Centos-Client [Datastore2] centos-test2/centos-test2.vmx centos7_64Guest vmx-14
2019-11-05T00:01:09| 24 Centos-client-freeipa [Datastore2] Centos-FreeIPA/Centos-FreeIPA.vmx centos7_64Guest vmx-14
2019-11-05T00:01:09| 25 Cypher-1 - Mysql-1 [datastore1] Cypher-1 - Mysql-1/Default-Ubuntu-16.04.vmx ubuntu64Guest vmx-13
2019-11-05T00:01:10| 26 Trinity-WebServer [Datastore2] Trinity-WebServer/Default-Ubuntu-16.04.vmx ubuntu64Guest vmx-13
2019-11-05T00:01:10| 30 Gitlab [Datastore2] Gitlab/Gitlab.vmx ubuntu64Guest vmx-14
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:01:10| VMs to backup:
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:01:10| 10 Auth-1 [Datastore2] Auth-1/Auth-1a.vmx centos6_64Guest vmx-13
2019-11-05T00:01:12| 11 ad-1.domain.com [Datastore2] ad-1.domain.com/ad-1.domain.com.vmx windows8Server64Guest vmx-13
2019-11-05T00:01:13| 16 Tank - FTP [Datastore2] Tank - FTP/Tank - FTP.vmx ubuntu64Guest vmx-13
2019-11-05T00:01:14| 17 Egitlab [Datastore2] Egitlab/Egitlab.vmx ubuntu64Guest vmx-13
2019-11-05T00:01:16| 19 FlexLM-1 [Datastore2] FlexLM-1/Default-Ubuntu-16.04.vmx ubuntu64Guest vmx-13
2019-11-05T00:01:17| 20 LSF Master [Datastore2] LSF Master/LSF Master.vmx ubuntu64Guest vmx-13
2019-11-05T00:01:18| 25 Cypher-1 - Mysql-1 [datastore1] Cypher-1 - Mysql-1/Default-Ubuntu-16.04.vmx ubuntu64Guest vmx-13
2019-11-05T00:01:20| 26 Trinity-WebServer [Datastore2] Trinity-WebServer/Default-Ubuntu-16.04.vmx ubuntu64Guest vmx-13
2019-11-05T00:01:22| 30 Gitlab [Datastore2] Gitlab/Gitlab.vmx ubuntu64Guest vmx-14
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:01:24| Calculating sizes...
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:01:24| Needed room: 407 Gb.
2019-11-05T00:01:24| Sparse size: 560 Gb.
2019-11-05T00:01:24| Available room: 11833 Gb.
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:01:25| [Auth-1] Starting backup (size is 16384M on 16384M file)
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:01:25| XSIBackup will backup your VMs while they are running, so that users can continue to use the VM
2019-11-05T00:01:25| while the backup is taking place. You can also run --backup-how=cold|warm
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:01:25| Hot backup selected for VM: [Auth-1], will not be switched off
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:01:25| [Auth-1] info: boot partition is MBR
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:01:26| Removing snapshots, please wait...
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:01:27| Syncronizing config files
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:01:29| [Auth-1] info: VMWare tools were not detected, the system will not be quiesced
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:01:30| Backing up virtual disks...
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:01:30| scsi0:0.fileName = "Auth-1a.vmdk"
---------------------------------------------------------------------------------------------------------------------------------
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/Datastore2/Auth-1/Auth-1a.vmdk'...
Clone: 100% done.
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:04:15| [Auth-1] Disk copied to /vmfs/volumes/Backups/Auth-1/Auth-1a.vmdk
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:04:29| [ad-1.domain.com] Starting backup (size is 38449M on 40960M file)
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:04:29| XSIBackup will backup your VMs while they are running, so that users can continue to use the VM
2019-11-05T00:04:29| while the backup is taking place. You can also run --backup-how=cold|warm
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:04:29| Hot backup selected for VM: [ad-1.domain.com], will not be switched off
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:04:30| [ad-1.domain.com] info: boot partition is MBR
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:04:30| [ad-1.domain.com] info: Win64 OS (windows8Server64) detected on MBR, applying Windows algorithm
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:04:30| Removing snapshots, please wait...
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:04:31| Syncronizing config files
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:04:36| [ad-1.domain.com] info: VMWare tools were not detected, the system will not be quiesced
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:04:37| Backing up virtual disks...
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:04:37| scsi0:0.fileName = "ad-1.domain.com.vmdk"
---------------------------------------------------------------------------------------------------------------------------------
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/Datastore2/ad-1.domain.com/ad-1.domain.com.vmdk'...
Clone: 100% done.
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:11:23| [ad-1.domain.com] Disk copied to /vmfs/volumes/Backups/ad-1.domain.com/ad-1.domain.com.vmdk
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:11:38| [Tank - FTP] Starting backup (size is 51957M on 131072M file)
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:11:38| XSIBackup will backup your VMs while they are running, so that users can continue to use the VM
2019-11-05T00:11:38| while the backup is taking place. You can also run --backup-how=cold|warm
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:11:38| Hot backup selected for VM: [Tank - FTP], will not be switched off
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:11:38| [Tank - FTP] info: boot partition is MBR
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:11:39| Removing snapshots, please wait...
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:11:39| Syncronizing config files
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:11:45| [Tank - FTP] info: VMWare Tools detected, taking snapshot QUIESCED(false)...
2019-11-05T00:11:45| [Tank - FTP] info: set argument --snapshot=doquiesce to quiesce your VMs
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:11:50| Backing up virtual disks...
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:11:50| scsi0:0.fileName = "Tank - FTP.vmdk"
---------------------------------------------------------------------------------------------------------------------------------
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/Datastore2/Tank - FTP/Tank - FTP.vmdk'...
Clone: 100% done.
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:20:27| [Tank - FTP] Disk copied to /vmfs/volumes/Backups/Tank - FTP/Tank - FTP.vmdk
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:20:41| [Egitlab] Starting backup (size is 32302M on 40960M file)
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:20:41| XSIBackup will backup your VMs while they are running, so that users can continue to use the VM
2019-11-05T00:20:41| while the backup is taking place. You can also run --backup-how=cold|warm
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:20:41| Hot backup selected for VM: [Egitlab], will not be switched off
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:20:42| [Egitlab] info: boot partition is MBR
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:20:42| Removing snapshots, please wait...
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:20:43| Syncronizing config files
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:20:46| [Egitlab] info: VMWare Tools detected, taking snapshot QUIESCED(false)...
2019-11-05T00:20:46| [Egitlab] info: set argument --snapshot=doquiesce to quiesce your VMs
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:20:50| Backing up virtual disks...
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:20:50| scsi0:0.fileName = "Egitlab.vmdk"
---------------------------------------------------------------------------------------------------------------------------------
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/Datastore2/Egitlab/Egitlab.vmdk'...
Clone: 100% done.
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:26:10| [Egitlab] Disk copied to /vmfs/volumes/Backups/Egitlab/Egitlab.vmdk
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:26:24| [FlexLM-1] Starting backup (size is 32768M on 32768M file)
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:26:24| XSIBackup will backup your VMs while they are running, so that users can continue to use the VM
2019-11-05T00:26:24| while the backup is taking place. You can also run --backup-how=cold|warm
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:26:24| Hot backup selected for VM: [FlexLM-1], will not be switched off
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:26:24| [FlexLM-1] info: boot partition is MBR
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:26:25| Removing snapshots, please wait...
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:26:26| Syncronizing config files
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:26:27| [FlexLM-1] info: VMWare Tools detected, taking snapshot QUIESCED(false)...
2019-11-05T00:26:27| [FlexLM-1] info: set argument --snapshot=doquiesce to quiesce your VMs
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:26:32| Backing up virtual disks...
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:26:32| scsi0:0.fileName = "Default-Ubuntu-16.04_0.vmdk"
---------------------------------------------------------------------------------------------------------------------------------
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/Datastore2/FlexLM-1/Default-Ubuntu-16.04_0.vmdk'...
Clone: 100% done.
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:31:54| [FlexLM-1] Disk copied to /vmfs/volumes/Backups/FlexLM-1/Default-Ubuntu-16.04_0.vmdk
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:32:08| [LSF Master] Starting backup (size is 15566M on 81920M file)
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:32:08| XSIBackup will backup your VMs while they are running, so that users can continue to use the VM
2019-11-05T00:32:08| while the backup is taking place. You can also run --backup-how=cold|warm
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:32:08| Hot backup selected for VM: [LSF Master], will not be switched off
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:32:08| [LSF Master] info: boot partition is MBR
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:32:09| Removing snapshots, please wait...
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:32:10| Syncronizing config files
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:32:11| [LSF Master] info: VMWare Tools detected, taking snapshot QUIESCED(false)...
2019-11-05T00:32:11| [LSF Master] info: set argument --snapshot=doquiesce to quiesce your VMs
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:32:16| Backing up virtual disks...
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:32:16| scsi0:0.fileName = "LSF Master.vmdk"
---------------------------------------------------------------------------------------------------------------------------------
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/Datastore2/LSF Master/LSF Master.vmdk'...
Clone: 100% done.
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:34:45| [LSF Master] Disk copied to /vmfs/volumes/Backups/LSF Master/LSF Master.vmdk
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:34:58| [Cypher-1 - Mysql-1] Starting backup (size is 32768M on 32768M file)
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:34:58| XSIBackup will backup your VMs while they are running, so that users can continue to use the VM
2019-11-05T00:34:58| while the backup is taking place. You can also run --backup-how=cold|warm
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:34:58| Hot backup selected for VM: [Cypher-1 - Mysql-1], will not be switched off
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:34:59| [Cypher-1 - Mysql-1] info: boot partition is MBR
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:34:59| Removing snapshots, please wait...
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:35:00| Syncronizing config files
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:35:02| [Cypher-1 - Mysql-1] info: VMWare Tools detected, taking snapshot QUIESCED(false)...
2019-11-05T00:35:02| [Cypher-1 - Mysql-1] info: set argument --snapshot=doquiesce to quiesce your VMs
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:35:07| Backing up virtual disks...
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:35:07| scsi0:0.fileName = "Default-Ubuntu-16.04_0.vmdk"
---------------------------------------------------------------------------------------------------------------------------------
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/datastore1/Cypher-1 - Mysql-1/Default-Ubuntu-16.04_0.vmdk'...
Clone: 100% done.
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:40:18| [Cypher-1 - Mysql-1] Disk copied to /vmfs/volumes/Backups/Cypher-1 - Mysql-1/Default-Ubuntu-16.04_0.vmdk
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:40:31| [Trinity-WebServer] Starting backup (size is 65536M on 65536M file)
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:40:31| XSIBackup will backup your VMs while they are running, so that users can continue to use the VM
2019-11-05T00:40:31| while the backup is taking place. You can also run --backup-how=cold|warm
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:40:31| Hot backup selected for VM: [Trinity-WebServer], will not be switched off
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:40:32| [Trinity-WebServer] info: boot partition is MBR
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:40:32| Removing snapshots, please wait...
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:40:33| Syncronizing config files
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:40:36| [Trinity-WebServer] info: VMWare Tools detected, taking snapshot QUIESCED(false)...
2019-11-05T00:40:36| [Trinity-WebServer] info: set argument --snapshot=doquiesce to quiesce your VMs
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:40:40| Backing up virtual disks...
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:40:40| scsi0:0.fileName = "Default-Ubuntu-16.04_0.vmdk"
2019-11-05T00:40:40| scsi0:1.fileName = "Default-Ubuntu-16.04.vmdk"
---------------------------------------------------------------------------------------------------------------------------------
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/Datastore2/Trinity-WebServer/Default-Ubuntu-16.04_0.vmdk'...
Clone: 100% done.
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:45:56| [Trinity-WebServer] Disk copied to /vmfs/volumes/Backups/Trinity-WebServer/Default-Ubuntu-16.04_0.vmdk
---------------------------------------------------------------------------------------------------------------------------------
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/Datastore2/Trinity-WebServer/Default-Ubuntu-16.04.vmdk'...
Clone: 100% done.
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:51:07| [Trinity-WebServer] Disk copied to /vmfs/volumes/Backups/Trinity-WebServer/Default-Ubuntu-16.04.vmdk
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:51:21| [Gitlab] Starting backup (size is 131072M on 131072M file)
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:51:21| XSIBackup will backup your VMs while they are running, so that users can continue to use the VM
2019-11-05T00:51:21| while the backup is taking place. You can also run --backup-how=cold|warm
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:51:21| Hot backup selected for VM: [Gitlab], will not be switched off
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:51:21| [Gitlab] info: boot partition is MBR
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:51:22| Removing snapshots, please wait...
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:51:23| Syncronizing config files
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:51:27| [Gitlab] info: VMWare Tools detected, taking snapshot QUIESCED(false)...
2019-11-05T00:51:27| [Gitlab] info: set argument --snapshot=doquiesce to quiesce your VMs
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:51:31| Backing up virtual disks...
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T00:51:31| scsi0:0.fileName = "Gitlab.vmdk"
2019-11-05T00:51:31| scsi0:1.fileName = "Gitlab_1.vmdk"
---------------------------------------------------------------------------------------------------------------------------------
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/Datastore2/Gitlab/Gitlab.vmdk'...
Clone: 100% done.
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T01:01:40| [Gitlab] Disk copied to /vmfs/volumes/Backups/Gitlab/Gitlab.vmdk
---------------------------------------------------------------------------------------------------------------------------------
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/Datastore2/Gitlab/Gitlab_1.vmdk'...
Clone: 100% done.
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T01:09:41| [Gitlab] Disk copied to /vmfs/volumes/Backups/Gitlab/Gitlab_1.vmdk
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T01:09:56| The ESXi configuration was saved to "/vmfs/volumes/Backups"
---------------------------------------------------------------------------------------------------------------------------------
2019-11-05T01:09:56| No errors detected in backup
---------------------------------------------------------------------------------------------------------------------------------
Using stored SMTP server info...
Found conf/smtpsrvs file...
Using SMTP server 1
Open firewall: 2019-11-05T01:09:57| Opening port 25 for SMTPout-25 service...
220 Zion.domain.com ESMTP Postfix (Ubuntu)
250 Zion.domain.com
250-Zion.domain.com
250-PIPELINING
250-SIZE 10240000
250-VRFY
250-ETRN
250-STARTTLS
250-ENHANCEDSTATUSCODES
250-8BITMIME
250 DSN
250 2.1.0 Ok
250 2.1.5 Ok
354 End data with <CR><LF>.<CR><LF>
250 2.0.0 Ok: queued as AC53B5A00EF
221 2.0.0 Bye
2019-11-05T01:10:06| Firewall rule SMTPout-25 closed.
2019-11-05T01:10:06| Backup finished
2019-11-05T01:10:06| Tip: no chained backups scheduled, set --on-success and/or --on-error arguments to chain a backup

Last edited by rob@24365.ca (2019-11-05 14:41:23)

admin · 2019-11-06 11:41:25

We can't find any segfault in the log.

Forum ©XSIBackup: ©VMWare ©ESXi Backup Software

#1 2019-11-04 16:15:57

Seg Fault on manual backup

#2 2019-11-05 10:58:20

Re: Seg Fault on manual backup

#3 2019-11-05 14:39:19

Re: Seg Fault on manual backup

#4 2019-11-06 11:41:25

Re: Seg Fault on manual backup

Board footer