Forum ©XSIBackup: ©VMWare ©ESXi Backup Software

gugansf

Member

Registered: 2019-05-13

Posts: 6

The system cannot find the file specified (25)

Can anyone help me correct this error?

Backing up virtual disks...
------------------------------------------------------------------------------------------------------------------------------------------------------------
scsi0:0.fileName = "JUTFEDCS0101/JUTFEDCS0101.vmdk"
------------------------------------------------------------------------------------------------------------------------------------------------------------
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/VMDTST01/JUTFEDCS0101-2/JUTFEDCS0101/JUTFEDCS0101.vmdk'...
------------------------------------------------------------------------------------------------------------------------------------------------------------
[JUTFEDCS0101-2] CLVMKFS1 error: Failed to clone disk: The system cannot find the file specified (25).

VMX configuration file:

.encoding = "UTF-8"
config.version = "8"
virtualHW.version = "13"
vmci0.present = "TRUE"
floppy0.present = "FALSE"
numvcpus = "2"
memSize = "4096"
bios.bootRetry.delay = "10"
sched.cpu.units = "mhz"
sched.cpu.affinity = "all"
powerType.suspend = "soft"
tools.upgrade.policy = "manual"
scsi0.virtualDev = "lsisas1068"
scsi0.present = "TRUE"
sata0.present = "TRUE"
usb.present = "TRUE"
ehci.present = "TRUE"
ethernet0.virtualDev = "e1000e"
ethernet0.networkName = "VM Network"
ethernet0.addressType = "generated"
ethernet0.wakeOnPcktRcv = "FALSE"
ethernet0.present = "TRUE"
displayName = "JUTFEDCS0101-2"
guestOS = "windows8srv-64"
toolScripts.afterPowerOn = "TRUE"
toolScripts.afterResume = "TRUE"
toolScripts.beforeSuspend = "TRUE"
toolScripts.beforePowerOff = "TRUE"
tools.syncTime = "FALSE"
uuid.bios = "56 4d 90 85 27 0a 77 ad-50 78 2c e2 73 6b 8a 1b"
uuid.location = "56 4d 90 85 27 0a 77 ad-50 78 2c e2 73 6b 8a 1b"
vc.uuid = "52 ab 16 50 15 73 fc 82-62 ca 03 cf f3 14 38 fd"
sched.cpu.min = "0"
sched.cpu.shares = "normal"
sched.mem.min = "0"
sched.mem.minSize = "0"
sched.mem.shares = "normal"
scsi0:0.deviceType = "scsi-hardDisk"
scsi0:0.fileName = "/vmfs/volumes/5a1980ea-3d4600b9-2fbd-000e1eababd0/JUTFEDCS0101-2/JUTFEDCS0101/JUTFEDCS0101.vmdk"
sched.scsi0:0.shares = "normal"
sched.scsi0:0.throughputCap = "off"
scsi0:0.present = "TRUE"
ethernet0.generatedAddress = "00:0c:29:6b:8a:1b"
vmci0.id = "1936427547"
cleanShutdown = "FALSE"
extendedConfigFile = "JUTFEDCS0101-2.vmxf"
tools.guest.desktop.autolock = "FALSE"
nvram = "JUTFEDCS0101-2.nvram"
pciBridge0.present = "TRUE"
svga.present = "TRUE"
pciBridge4.present = "TRUE"
pciBridge4.virtualDev = "pcieRootPort"
pciBridge4.functions = "8"
pciBridge5.present = "TRUE"
pciBridge5.virtualDev = "pcieRootPort"
pciBridge5.functions = "8"
pciBridge6.present = "TRUE"
pciBridge6.virtualDev = "pcieRootPort"
pciBridge6.functions = "8"
pciBridge7.present = "TRUE"
pciBridge7.virtualDev = "pcieRootPort"
pciBridge7.functions = "8"
hpet0.present = "TRUE"
RemoteDisplay.maxConnections = "-1"
sched.cpu.latencySensitivity = "normal"
disk.EnableUUID = "TRUE"
numa.autosize.vcpu.maxPerVirtualNode = "2"
numa.autosize.cookie = "20001"
sched.swap.derivedName = "/vmfs/volumes/5a1980ea-3d4600b9-2fbd-000e1eababd0/JUTFEDCS0101-2/JUTFEDCS0101-2-dcdce8f5.vswp"
pciBridge0.pciSlotNumber = "17"
pciBridge4.pciSlotNumber = "21"
pciBridge5.pciSlotNumber = "22"
pciBridge6.pciSlotNumber = "23"
pciBridge7.pciSlotNumber = "24"
scsi0.pciSlotNumber = "160"
usb.pciSlotNumber = "32"
ethernet0.pciSlotNumber = "192"
ehci.pciSlotNumber = "33"
vmci0.pciSlotNumber = "34"
sata0.pciSlotNumber = "35"
scsi0.sasWWID = "50 05 05 65 27 0a 77 a0"
ethernet0.generatedAddressOffset = "0"
vm.genid = "5693627679385746227"
vm.genidX = "-7242058114688491387"
monitor.phys_bits_used = "43"
vmotion.checkpointFBSize = "4194304"
vmotion.checkpointSVGAPrimarySize = "4194304"
softPowerOff = "FALSE"
usb:1.speed = "2"
usb:1.present = "TRUE"
usb:1.deviceType = "hub"
usb:1.port = "1"
usb:1.parent = "-1"
svga.guestBackedPrimaryAware = "TRUE"
usb:0.present = "TRUE"
usb:0.deviceType = "hid"
usb:0.port = "0"
usb:0.parent = "-1"
migrate.hostLog = "./JUTFEDCS0101-2-dcdce8f5.hlog"
scsi0:0.redo = ""

admin

Administrator

Registered: 2017-04-21

Posts: 2,055

Re: The system cannot find the file specified (25)

View the contents of your descriptor file, the small one that ends in .vmdk, not -flat.vmdk and see to which -flat.vmdk file it is pointing and whether it is the correct one.

gugansf

Member

Registered: 2019-05-13

Posts: 6

Re: The system cannot find the file specified (25)

There are no -flat.vmdk in VMs folder.....

admin

Administrator

Registered: 2017-04-21

Posts: 2,055

Re: The system cannot find the file specified (25)

Then inspect your descriptor files as stated above and find out where those -flat.vmdk files are, cause if there are no -flat.vmdk files, there is no data, there are no VM.