#1 2018-11-26 18:14:21

newmember
Member
Registered: 2018-10-15
Posts: 34

Link/List/ crash ver 11.1.6

New xsibackup install

I added a new host
I tried to list the new host
xsibackup pro gui crashed

I tried to add the host again and I see that is already added.


Enabling port 22 out in the ESXi firewall...
There is already an RSA public key at /vmfs/volumes/datastore1/xsi-dir/xsibackup_id_rsa.pub. We will use the existing one.
Enter the remote server root password when prompted.
2018-11-26T18:08:16|  Enter remote systems's password for user root, checking OS type...
Password:
Password:
The local RSA key has already been added to the authorized_keys file at 10.240.100.39:22.
There is no need to add it again, you should be able to connect with XSIBackup to 10.240.100.39:22 without any password.
Killed



Thoughts
Thanks

Offline

#2 2018-11-26 19:25:23

admin
Administrator
Registered: 2017-04-21
Posts: 1,366

Re: Link/List/ crash ver 11.1.6

Where did you try to list the host from?.

Please, be aware that the option "List servers linked to this host" lists servers which have been added to the current host, so you should be running that in the remote host, which probably does not have a full XSIBackup installation, should it be a subsidiary installation performed by the --host option, which just copies the files needed to perform a backup via cron.

We'll improve this part of the menu in next versions, it's a bit confusing.

Offline

#3 2018-11-27 19:38:48

newmember
Member
Registered: 2018-10-15
Posts: 34

Re: Link/List/ crash ver 11.1.6

on the host with the xsibackup pro installed

After starting XSI GUI

Select Link
Select List

crash back to cli

Last edited by newmember (2018-11-27 19:40:05)

Offline

#4 2018-11-29 16:36:52

admin
Administrator
Registered: 2017-04-21
Posts: 1,366

Re: Link/List/ crash ver 11.1.6

What do you mean by crash?
What we understand by crash is some awful incident in which everything stops working after a race condition.

Have you linked some remote server to the ESXi box where you run the List option.
If not, why do you expect the option to list anything?

Offline

#5 2018-11-30 01:20:31

newmember
Member
Registered: 2018-10-15
Posts: 34

Re: Link/List/ crash ver 11.1.6

"crash back to cli"

xsibackup application stopped

now I am back at the cli

Offline

#6 2018-11-30 14:59:24

admin
Administrator
Registered: 2017-04-21
Posts: 1,366

Re: Link/List/ crash ver 11.1.6

Well, if you call "crash" to the program "exiting back to the command line", then we are not going to understand each other.
What you are describing so far seems to be normal behavior.

Offline

Board footer